NEC 42PD2, 50PD1 SETTING 2. POSITION OF DRIVER NO.1, Multiple Screens, Screen selection, Exit

Multiple Screens

Select the screen mode from among 1 or 4 screens. (Normally 1 is selected.)

VIDEO WALL can be achieved from two or four screens with the sole use of the main unit.

For information about compatible signals, see the Signal

Preset Table of factory setting values on Page 49.

1.Align the cursor with icon (12) on the second page

The cursor is moved left and right with the POSITION CONTROL◀ / ♣ buttons.

Multiple Screens

Icon (12)

VIDEO WALL MENU 1. SCREEN DIVIDER

SETTING : 1

2. POSITION OF

DRIVER :

2.Align the cursor using ▲ / ▼ buttons with the SCREEN DIVIDER SETTING and use the ◀ / ♣ buttons to select 1 screen or 4 screens.

Use the left and right cursors to change the setting between 1 → 4 → in toggle fashion. (The initial value

is 1.)

POSITION / CONTROL

3.Align the cursor with POSITION OF SETTING and set with the ◀ / ♣ buttons.

Nothing will be displayed when “1” is selected in the

SCREEN WALL MENU.

When “4” is selected, the icon of the right screen is displayed.

Use the right cursor button to go clockwise and select screen 1 from among the 4 screens. Set the number to “1” at the upper left, and display “1 to 4” going clockwise.

There is no selection for the initial value.

VIDEO WALL MENU 1. SCREEN DIVIDER

SETTING : 4

2. POSITION OF

DRIVER : NO.1

4.Return to the main menu

EXIT

*To delete the main menu, press the EXIT button once more.

Move up

Screen selection:

4 Screens

Move down

No.1 No.2

No.4 No.3

43