NEC 42PD2, 50PD1, 50PD1, 42PD2 user manual Position Height, Adjustment of Screen Position Vertical

Adjustment of Screen Position (Vertical)

Vertical (V) Adjustment Screen

1.Align the cursor with icon (3)

The cursor is moved left and right with the POSITION CONTROL◀ / ♣ buttons.

V-HEIGHT: Vertical enlargement ratio adjustment (Displayed only with Multiple Screens) Adjustment is possible only in multi mode.

V-POSITION 2 cannot be adjusted at the time of VIDEO input.

Vertical (V) adjustment screen

Icon (3)

V-POSITION 1

V-POSITION 2

V-HEIGHT

3.While watching the screen, press the ◀ / ♣ buttons and adjust

POSITION / CONTROL

◀ MOVE DOWN MOVE UP ♣

4.Return to the main menu

EXIT

2.Align the cursor with the desired item

The cursor is moved up and down with the POSITION CONTROL ▲ / ▼ buttons.

V-POSITION 1: Vertical position 1 Used to align the raster on the PDP. V-POSITION 2: Vertical position 2

Only needs to be adjusted when V-Position 1 does not allow the complete image to fill the screen. (Adjustment is not required with a standard signal.) V-HEIGHT: Vertical enlargement ratio adjustment (Displayed only with Multiple Screens)

Adjustment is possible only in multi mode. V-POSITION 2 cannot be adjusted at the time of VIDEO input.

V-POSITION 1

V-POSITION 2

V-HEIGHT

*To reset the adjustment value, press the RASTER NORMAL button before pressing the EXIT button.

*To delete the main menu, press the EXIT button once more.

*H-POSITION 1,2 and V-POSITION 1,2 are not available at the time of RGB input when AUTO PIC- TURE is turned on.

To adjust H-POSITION 1,2 and V-POSITION 1,2 at the time of RGB input, turn off AUTO PICTURE.

*Horizontal and Vertical Position Controls

Both the horizontal and vertical position controls in the OSM include a POSITION 1 and a POSITION 2 adjustment when an RGB signal is selected for display. These two position controls provide access to the entire raster position (POSITION 1) and a fine adjustment within the raster (POSITION 2). First adjust POSITION 1 so that the raster fills the entire screen. After the raster position is set properly, then select POSITION 2 to make sure that the image fills the raster and all of the image is filling the screen.

NOTE: Make sure that none of the actual image is missing, left to right or top to bottom.

31