Manuals / NEC / Computer Equipment / Computer Monitor

NEC 50PD1, 42PD2, 42PD2, 50PD1 user manual Specifications, PlasmaSync 42PD2 Model PX-42VP2A

Models: 50PD1, 42PD2 42PD2, 50PD1

1 64

Download 64 pages 24.92 Kb

Page 48

Specifications

PlasmaSync 42PD2 (Model PX-42VP2A)

	Plasma Screen	42 inch Visual size (Diagonal), AC Drive type
		Aspect ratio : 16:9
		Optical filter coating
		Display color : 16,770,000 colors 256 levels
	RGB Input Terminals	RGB 1	:	mini D-SUB 15pin
		RGB 2	:	BNC (R,G,B, H/CS and V)
		RGB 3	:	Digital RGB (DVI 24+5pin: Not compatible with analog input.
				Complies with DVI
		Video	:	Analog 0.7Vp-p/75 Ohms (Positive)
			:	Sync.	: Separate Sync. TTL level, 0.7 - 4.0Vp-p/75 Ohms				BNC only
					Horizontal Sync.			(Positive/Negative)
					Vertical Sync.			(Positive/Negative)
			: Composite Sync. TTL Level					(Positive/Negative)
			: Composite Sync. On Green Video 0.3Vp-p (Negative)

	RGB Output Terminals	BNC (R,G,B, H/CS and V)
	THROUGH OUT	RGB THROUGHOUT (RGB2 only)

	Video Input Terminals	1.0Vp-p, 75 Ohms unbalanced (BNC-Jack), Composite video signal, Sync-negative.
	VIDEO	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
	S-VIDEO	C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
	Video Output Terminals
	THROUGH OUT	1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative.
	THROUGH OUT (S-VIDEO)	Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative.
		C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level.
	External Control	mini D-SUB 15pin (IN/THROUGH OUT)
	(IN/THROUGH OUT)	Open/Short, RS-232C Control
	Synchronization Range	Horizontal : 15.5 to 68.7 KHz (automatic : step scan)
		Vertical : 46.0 to 85.0 Hz (automatic : step scan)
	Maximum Resolution	RGB : 853( H) X			480(V) pixels

	Power Supply	100-120 VAC, 50/60 Hz

	Current Rating	5.6A (maximum)
	Power consumption	430W (typical)
	Dimensions	39.3(W) x 23.4(H) x 4.5(D) inches / 998(W) X 595(H) X114(D) mm
	Weight	72.7lbs/33kg
	Environmental Considerations	Operating Temperature				:	0to 40
					Humidity	:	20 to 80%
					Altitude	:	0 to 6233 feet(1900m)
		Storage Temperature				:	-10 to 50
					Humidity	:	10 to 90%
					Altitude	:	0 to 9842 feet(3000m)

	Regulations :	UL/C-ULApproved (UL 1950/CSA 950)
		DOC Canada requirements
		Meets FCC class A requirements

All specifications are subject to change without notice.

48

Image 48

NEC 50PD1, 42PD2, 42PD2, 50PD1 user manual Specifications, PlasmaSync 42PD2 Model PX-42VP2A

Contents

User’s Manual PlasmaSync Plasma MonitorNEC Technologies Precautions Warnings and Safety PrecautionImportant Information DOC compliance NoticeClose the lid tightly until the clamps click Précautions DOC avis de conformationAVERTISSEMENT Mises en garde et précautions de sécuritéREMARQUE Limited Warranty Plasma Monitors HOW LONG IS THE WARRANTY?WHAT IS COVERED AND WHAT IS NOT COVERED HOW YOU CAN GET WARRANTY SERVICEContents Making the DIP Switch SettingsInstallation Adjustment of the Display Menu ControlVentilation Requirements for en- closure mounting Pulling Out and Reinserting the Retractable FeetDrawing A Drawing B How to Attach Options to the Plasma MonitorThe features you’ll enjoy include Contents of the PackageIntroduction Introduction to the PlasmaSync 42PD2/50PD1Setup Procedure 1. Determine the installation location3. Install the remote control batteries 4. Connect the supplied power cableAttaching the Remote Control Holder Housing the Remote Control in the Remote Control HolderOpening the Terminal Board Cover Removing the Terminal Board Cover1 POWER/STANDBY 2 Remote control sensor9 POWER button Part Names and Functions15 VIDEO IN BNC connector BNC Inputs the video composite video signal IN S connector DIN 4 pin Inputs the S video Y/ C separate signal18 AC IN connector Side View.... Terminal Board L/RRemote Controller 1 POWER ON/OFF button Switches the power on/off5 RASTER CONTROL Screen Adjustment 3 POSITION/CONTROL buttons ON SCREEN Screen and Image Adjustment via Menu Control16 Remote control transmitter Battery Installation and Replacement11 SHARPNESS 12 VISUAL NORMAL buttonUsing the wired remote control mode Operating RangeMaking the DIP Switch Settings DIP Switch Functions and SettingsFactory Default Settings No. 1 On/off switching of on-screen display OSMPower Management Function Power Management ModesStandby mode Suspend modeInstallation Wiring DiagramPlasma monitor Document camera VCR, Video copy stand or Multimedia applicationConnecting Your PC or Macintosh Computer Connecting Your VCR DVD or Laser Disc PlayerConnecting Your Document Camera Connections with Equipment that has a Digital InterfaceWhen using the VIDEO inputs When using the RGB2 InputDaisy-chaining Your monitors Power Adjustment of the Display3. Adjust The Raster or The Picture Control When Using the Power Management FunctionAdjustment of the Display Direct ABOUT TO PRESET RASTER PRESSAdjustment of the Screen Adjustment of the screen display positionAdjustment of the Image ABOUT TO PRESET VISUAL PRESSItems adjusted with the VIDEO and RGB signals Contrast adjustment CONTRASTAdjustment of the DisplayMenu Control List of Setting DetailsAdjustment details Display ModeSETTINGS SETTINGSBefore Making Adjustments Adjust using the remote control buttons PROCEED buttonEXIT button POSITION/CONTROL / buttonsTo Reset the Adjustment Value to the Factory Default Setting ABOUT TO RESETPRESS 1. Press the VISUAL NORMAL button or RASTER NORMAL buttonAdjustment of the Image Visual Controls 3. While watching the screen, press the / buttons and adjustBRIGHTNESS CONTRAST SHARPNESS COLOR TINT GAMMA2 EXITAdjustment of Screen Position Horizontal H-POSITION H-POSITION H-WIDTH3. While watching the screen, press the / buttons and adjust H-POSITION H-POSITION H-WIDTHAdjustment of Screen Position Vertical V-POSITION V-POSITION V-HEIGHT3. While watching the screen, press the / buttons and adjust V-POSITION V-POSITION V-HEIGHTColor Temperature COLOR TEMP COLOR TEMPCOLOR TEMP HIGH LOW USER 2. Align the cursor with COLOR TEMP and set with the / buttonsCOLOR TEMP HIGH LOW USER PRESS PROCEED FOR GAIN / BIAS SETTING Adjustment of the White BalanceR-GAIN WHITE LEVEL G-GAIN WHITE LEVEL B-GAIN WHITE LEVEL R-BIAS BLACK LEVEL G-BIAS BLACK LEVEL B-BIAS BLACK LEVELAdjustment of the On-screen Display Position 3. Exiting the adjustmentOSM H-POS OSM V-POS OSM ANGLE OSM DISPLAY TIME OSM H-POS OSM V-POS OSM ANGLE OSM DISPLAY TIMESetting the On-screen Display OFF Time OSM H-POS OSM V-POS OSM ANGLE OSM DISPLAY TIME SECONDS 5 10 30 60OSM H-POS OSM V-POS OSM ANGLE OSM DISPLAY TIME EXITRGB MODE INPUT MODERGB MODE WIDE MODERGB MODE 4. Make the various adjustments with the POSITION CONTROL / buttonsClock phase adjustment Fine Picture 5. Return to the main menuALL VISUAL NORMAL ALL RASTER NORMAL ALL NORMAL PROCEED TO RESET ALL VISUAL NORMAL ALL RASTER NORMAL ALL NORMALSOURCE INFO RGB1 H-FREQ.31.5kHz V-FREQ.60.0Hz H-POL.NEG V-POL.POS Normal ScreenSOURCE INFO VIDEO MODE NTSC When RGB input is selected SOURCE RGB1, RGB2, RGB3When video input is selected Information ScreenPRESENT TIME DATE 1999. DEC TIME 22 SET TIMER OFF Timer ScreenSetting range of date and time settings 1. Align the cursor with icon 11 of the second pagePRESENT TIME DATE 1999. DEC TIME 22 SET TIMER ON PRESS PROCEED FOR PROGRAM MENU DATE ON OFF MODE OCT30 1010 1300 VIDEOAuto Timer Screen PROGRAM MENU9. Use the / bottons to select MODE and set to Move onto the OFF time and perform the functions as with the ON timeVIDEO, RGB1, RGB2, RGB3, INV or WT with the / buttons 10. Return to the main menuSETTING 2. POSITION OF DRIVER SETTING 2. POSITION OF DRIVER NO.1Multiple Screens 1. Align the cursor with icon 12 on the second pagePOWER ON MODE LAST MEM POWER MANAGER OFF EXTERNAL CONTROL OFF ALL RESETOther Setting Screens POWER ON MODELONG LIFE MODE GRAY LEVELSET ID NO RGB3 ADJID SELECT MENU SET NOID Selection Screen Press the EXIT button twiceTroubleshooting SymptomChecks RemedySpecifications PlasmaSync 42PD2 Model PX-42VP2APlasmaSync 50PD1 Model PX-50VP1A Signal Identification For Raster Preset AppendixPin Configuration and Signal of the RGB 3 IN Connector DVI Connector Signal level VIDEO signal 0.7Vp-p Analog Sync signal TTL levelFunction and Pin Configuration of the External Control Connector ApplicationConnections EXTERNAL CONTROLCommand Check Sum CKS, Error Processing, and ACKCommunication Parameters Communication FormatPage Page Page Page Page Page Page Page Page Cabinet dimensions Unit inchmm PlasmaSync 42PD2 Model PX-42VP2APlasmaSync 50PD1 Model PX-50VP1A NEC Technologies, Inc 1250 N. Arlington Heights Road, Suite Itasca, IllinoisPrinted in Japan 7S800091