Opening the Terminal Board Cover
Slide the knob and at the same time lift the cover.
Knob
Attaching the Remote Control Holder
Insert the top hook of the remote control holder into the installation hole of the main unit and then insert the bot- tom hook into its respective hole.
To remove the remote control holder, first release the bot- tom hook, then release the top hook.
1 
2
Removing the Terminal Board Cover
This unit’s terminal board cover can be removed. First, open the cover and then:
1.Pull the top hook in the direction of the arrow.
2.Pull the entire terminal board cover downward.
To attach the terminal board cover, insert the bottom hook into the hole, then pull the top hook and insert it into the hole.
Hook
1
2
Housing the Remote Control in the Remote Control Holder
First insert the bottom part of the remote control and con- tinue to push it in until the top part clicks into place.
To remove, lift the remote control up from the top part and remove it from the holder.
11
