Uniden XDECT R035 Announce Only, System cannot answer MobileLink, Calls, Xdect R035BT, Turned on

If…	Try…
	-- Making sure the Record Time is not set to
	Announce Only.
The system won’t record	-- Deleting messages (memory may be full).
messages.	-- Making sure the call was on the land line
	(the system cannot answer MobileLink
	calls).
A handset can’t access	-- Seeing if another handset is using the
	system.
the answering system.
	-- Making sure the phone is in standby.
	-- Making sure your phone is in pairing mode.
The XDECT R035BT	-- Check your phone’s manual for instructions
won’t pair with my	on Bluetooth device pairing.
phone.	-- Making sure your phone supports the
	Bluetooth handsfree profile.
	-- Making sure your phone has Bluetooth
	turned on.
The XDECT R035BT	-- Making sure your phone is in range of the
doesn’t ring when my	base.
cellular phone does.	-- Making sure the handset’s ringer is not
	turned off. (The base doesn’t ring on cellular
	calls.)
	-- Adjusting the handset volume.
	-- Setting your cellular phone to transfer
	the audio to a Bluetooth device. Check
The XDECT R035BT	your phone’s manual for instructions on
	Bluetooth setup and options.
paired with my phone,
	-- Erase the Bluetooth pairing and repair
but I can’t hear anything
through the handset.	the cellphone to the base. Press and hold
	MOBILELINK for 10 seconds. The base beeps
	and the Bluetooth pairing information is
	erased from the base (if 2 cellular phones
	are paired, both pairings are deleted).

32