In about 30 seconds, the handset display should say Registration Complete. Press TALK/FLASH and make sure you get a dial tone.
If... | Try... |
- you don’t hear a dial tone | Making sure the handset is |
- the display says Registration Failed | fully charged, then starting |
| over at step 1. |
Registering Repeaters
If you are having trouble with a repeater or if you want to replace one, you need to register the repeater to the base.
TIP: Connect the repeater close to the base for easy access to the necessary keys and indicators. Locate the repeater in the desired position after registration is complete.
1. On the base, press and hold FIND when the phone is in standby.
2. On the bottom of the repeater you want to register, press and hold the registration button until the LINK light blinks rapidly.
ht doesn't turn on,
3.In about 90 seconds, the LINK light on the repeater will turn on. The repeater has been registered to the base.
If the LINK light doesn't turn on, try these steps again.
37
