Uniden XDECT R035BT manual Weak or hard to hear audio, Noise or static on the line

Models: XDECT R035BT XDECT R035

1 48
Download 48 pages 50.42 Kb
Page 37
Image 37

If…

Try…

I can’t get my handset to

-- Re-registering the repeater.

switch to the repeater.

-- Making sure the repeater and handset are

registered to the same base.

 

 

 

The LINK light on the

 

repeater randomly

-- Moving the repeater closer to the base.

starts blinking.

 

 

 

Weak or hard to hear audio

If a caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak.

xx Try moving around while you’re on a call or moving closer to the base to see if the sound gets louder.

xx Make sure the handset’s battery is fully charged. xx Try adjusting the earpiece volume.

Noise or static on the line

Interference is the most common cause of noise or static on a cordless phone. Here are some common sources of interference:

xx electrical appliances, especially microwave ovens

xx computer equipment, especially wireless LAN equipment and DSL modems

xx

xx

xx

radio-based wireless devices, such as room monitors, wireless controllers, or wireless headphones or speakers fluorescent light fixtures (especially if they give off a buzzing noise)

other services that use your phone line, like alarm systems, intercom systems, or broadband Internet service

33

Page 37
Image 37
Uniden XDECT R035BT manual Weak or hard to hear audio, Noise or static on the line