Uniden XDECT R035BT manual Using the Repeater, How it works

Models: XDECT R035BT XDECT R035

1 48
Download 48 pages 50.42 Kb
Page 10
Image 10

Using the Repeater

How it works

An XDECT R003BT repeater can extend the range of your base in all directions, including up and down. The XDECT R003BT repeater unit is also a charger for the accessory handset.

Each handset will automatically connect to the repeater or the base, depending on which signal is stronger, and the handset operates exactly the same way whether it's connected to the base or to the repeater.

The repeaters must be registered to the base before you can use them. Any repeaters that come packaged with the base are already registered to that base. For instructions on registering repeaters to the base, see page 37.

Base coverage area (The base signal is stronger; handsets in this area connect to the base.)

Handset

Base

10m(Minimum separation distance)

(Handsets in this area can connect to either unit.)

Repeater

Repeater coverage area (The repeater signal is stronger; handsets in this area connect to the repeater.)

Handset

Note: Base range (grey area) and repeater range (dotted outline around repeater) is represented here as circular. Actual coverage area will vary depending on environment.

Your base supports a total of six XDECT R003BT repeaters, including

any that were supplied with your phone.

6

Page 10
Image 10
Uniden XDECT R035BT manual Using the Repeater, How it works