Philips SCD487 Using your baby monitor EN, Other features, Adjusting loudspeaker volume

Using your baby monitor EN

>The LINK lights (A-2, B-8) on both units blink green until connection has been established.This will take up to approximately 30 seconds. Both LINK lights (A-2, B-8) will then light green continously.

>If, after 30 seconds, no link is establshed both LINK lights (A-2, B-8) will light up red and the parent unit will emit a beep from time to time.

4Position the baby unit at least 1 meter / 3 feet away from

your baby.

5Position the parent unit at the desired place within the operating range of the baby unit but at least 1 meter / 3 feet away from the baby unit. For more information on the operating range see ‘Technical specifications’.

➜You can now monitor your baby!

Other features

Adjusting loudspeaker volume

•Briefly press the Volume + and – buttons (A-4) on the baby unit to increase/decrease the loudspeaker volume of the baby unit.

•Briefly press the Volume + and – buttons (B-10) on the parent unit to increase/decrease the loudspeaker volume of the parent unit.

Notes:

–If you press the Volume + and – buttons (A-4, B-10) too long, the volume will not be adjusted.

–If the volume is set to a high level, the units consume more power.

9