Philips SCD487 user manual Getting your baby monitor ready for use EN, Battery operated use

Getting your baby monitor ready for use EN

Battery operated use

1Open the battery compartment by turning the cover (A-9) to the left (1 OPEN), using the palm of your hand.

Take off the cover.

2Insert four 1.5V, AA batteries, noting the + and – configuration inside the battery compartment (batteries are not supplied; we recommend Philips Alkaline batteries).

3Put the battery compartment cover (A-9) back in place. Close the compartment by turning the cover (A-9) to the right (CLOSE 2), using the palm of your hand.

➜The baby unit is now ready for battery operated use!

Parent unit

The parent unit can be mains or battery operated.When batteries are inserted, you will have an automatic back-up in case of mains failure and you can carry the unit in and around the house.

Mains operated use

1Connect the the power adapter cord (B-14) to the power supply jack (DC 3.6V / 200mA - B-3) of the parent unit.

2Connect the AC power adapter (B-14) to a wall outlet.

➜The parent unit is now ready for mains operated use!

Battery operated use

1Open the battery compartment by sliding the cover (B-12)

downwards.

7