EN Other features

Connecting / disconnecting belt clip

If the parent unit is operating on batteries, you can carry it in and around your house, giving you freedom of movement while still monitoring your baby.

Connect

Insert the little spindle on the rear of the belt clip into the recess (B-11) on the rear of the parent unit.Turn the belt clip to the left until it clicks in position.

Disconnect

Turn the belt clip to the right (TURN 2) and take it off.

Paging parent unit

When the parent unit is misplaced and the volume is switched off, you can use the PAGE button (A-6) on the baby unit to locate the parent unit.

1Briefly press the PAGE button (A-6) on the baby unit. > A paging alert will sound on the parent unit.

2To stop the paging alert, briefly press the page button (A-6) again or any button on the parent unit.

Note: If you press the PAGE button (A-6) too long, the paging alert will not sound.

12

Page 12
Image 12
Philips SCD487 user manual Connecting / disconnecting belt clip, Paging parent unit