Philips SCD487 user manual EN Other features, Talking to your baby Talk function

EN Other features

Talking to your baby (Talk function)

While using the TALK button (B-1) on the parent unit you can talk to your baby (e.g to comfort your baby).

•Press and hold the TALK button (B-1) and talk clearly into the microphone (B-5).

•Release TALK button (B-1) when finished talking.

Note:When the TALK button (B-1) is pressed, you can no longer hear your baby.

Adjusting microphone sensitivity

With the SENSITIVITY (B-2) and Volume + and – (B-10) buttons on the parent unit, you can set the sound from the baby unit to the desired level.When set to the maximum level, the baby unit monitors continuously. All sounds (including your baby’s breathing, when loud enough) can be heard on the parent unit.You can only change the microphone sensitivity if the connection between the baby unit and the parent unit is established (when LINK lights (A-2, B-8) light continuously green).

1Briefly press the SENSITIVITY button (B-2) on the parent unit.

>The sound-level lights (B-9) give visual feedback on the current sensitivity level for approximately 2 seconds.

2Briefly press the Volume + and – buttons (B-10) on the parent unit to increase/decrease the microphone sensitivity of the baby unit.

Note: If you press the SENSITIVITY button (B-2) and/or the Volume + and – buttons (B-10) too long, the microphone sensitivity will not be adjusted.

>The sound-level lights (B-9) give visual feedback on the new setting for approximately 2 seconds:

-1 light (1 x orange) = minimum level / lowest sensitivity;

-all lights (5 x orange) = maximum level (continuous transmission) / highest sensitivity

Note:When the sensitivity level of the baby unit is set to a high level, the unit will consume more power because it is in continuous transmission mode.

10