Philips SCD487 user manual Problem Possible cause Solution, Plugged Baby unit

		Troubleshooting	EN
Problem	Possible cause	Solution
LINK light (A-2, B-8)	Parent unit:
does not light at all.	Power adapter (B-14) not	Connect power adapter (B-14)
	plugged in.	to parent unit.
		Connect power adapter (B-14)
		to wall outlet.
	Unit not turned on.	Press and hold On/Off button (y)
		(B-6) for two seconds.
	Batteries are low.	Replace batteries (B-12).
	Baby unit:
	Power adapter (A-11) not	Connect power adapter (A-11) to
	plugged in.	baby unit.
		Connect power adapter (A-11) to
		wall outlet.
	Batteries incorrectly inserted.	Insert batteries correctly.
	Unit not turned on.	Press and hold On/Off button (y)
		(A-1) for two seconds.
	Batteries are low.	Replace batteries (A-9).
LINK light (A2, B-8)	Units out of range.	Decrease distance between units
flashing red/alarm		(see ‘Technical specifications).
beeping on parent unit.

Batteries are low.

Units cannot establish connection, even when close to each other.

No power on one of the units.

Replace batteries (A-9, B-12).

Try solving the problem by using the factory initialization mode. See chapter ‘Factory initialization mode’.

Press On/Off button (A-1, B-6) for two seconds.

13