Uniden XDECT R035BT manual Personalizing Your Greeting, Switch between the two greetings

xx

xx

xx

You can press the number key next to the commands instead of scrolling through them.

If you don't press any keys for 30 seconds, the phone returns to standby.

Only one handset can access the system at a time, and you can't access the system while another handset is on a land line or MobileLink call.

Personalizing Your Greeting

Your greeting can be between 2 seconds and 30 seconds long. If you don’t record an outgoing message, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone.

Record your personal outgoing message or greeting

1.Access the system from any handset. Wait until the system finishes its announcements, or press 5 (Stop) to skip them.

2.Press 8 (RecNewGreeting).

3.Wait for the system to say “Record greeting,” then begin speaking.

4.When you’re finished, press 8 (RecNewGreeting) to recording. The system plays back your new greeting.

5.To keep this greeting, press End. To re-record it, go back to step 2.

Switch between the two greetings

1.Access the system from any handset. Wait until the system finishes its announcements, or press 5 (Stop) to skip them.

2.Press 6 (SelectGreeting) to play back the current greeting.

3.Press 6 (SelectGreeting) again to switch greetings.

Delete your greeting

Switch to your personal greeting following the steps above. While the system is playing back your greeting, press 4 (Delete).

27