Uniden XDECT R035BT manual Using the Answering System, Answering System Options Ans. Setup

number. Press Menu/select to transmit the code. Or, if you change your mind, use Phonebook/left to close the phonebook.

Voice message notification

xx This feature supports Frequency-Shift Keying (FSK) message notification. Contact your voice mail provider for more details.

xx If you subscribe to a voice mail service, your phone can notify you when you have a new message waiting.

xx When you have new messages, the voice message icon () appears in the display, and the light at the top of the handset blinks.

xx The voice message icon should disappear after you listen to all

your new messages. If it doesn’t, you can reset it manually: With the phone in standby, open the menu and select Global Setup. Select VMWI Reset, then select Yes.

Using the Answering System

The answering system works with land line calls only and provides up to 15 minutes of total record time. The system will not answer or take messages on incoming call on the paired Bluetooth phones.

Answering System Options (Ans. Setup)

You can change the answering system options from any handset. Just open the menu and select Ans. Setup. Select one of the following:

	Enter a 2-digit PIN so you can access your
Security Code	answering system from any touch-tone phone
	(see page 29).
	Set the number of rings (6, 9, or 12) before the
	answering system answers the phone. Choose
Ring Time	Toll Saver to have the system answer after 2
	rings if you have new messages or after 4 rings if
	you don’t.

25