Uniden XDECT R035BT manual Screening Your Calls, Using the System While You’re Away from Home

Screening Your Calls

Another feature your answering system gives you is call screening. While the system is taking a message, you can hear the caller on the base speaker (if you turn on Call Screen) or from a handset. Only one handset at a time can screen calls. If another handset is screening the call, the handset beeps and returns to standby.

To...	From the base	From a handset
hear the caller	Just listen to the
	caller over the	Press Messages/mute.
leaving a message
	speaker.
answer the call	Not available.	Press Talk/flash.
	Press Play/stop.	Press End or return the
		handset to the cradle.
mute the call screen
	If you mute the call screen, the system continues
without answering
	taking the message: it just stops playing through
	the speaker.

Using the System While You’re Away from Home

You can also use your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a security code

1.With the phone in standby, open the menu from any handset.

2.Select Ans. Setup, then select Security Code.

3.Use the number keypad to enter a two-digit security code (00 to 99). Press Menu/select when you’re finished.

##Remember to make a note of your new security code!

Dialing in to your system

1.Call your telephone number and wait for the system to answer. xx If you have the Ring Time set to Toll Saver, the system

answers after 2 rings if you have new messages and 4 rings if you don’t. You can hang up during the third or fourth ring.

29