Uniden XDECT R035 Setting Up the MobileLink Bluetooth Connection, Connect the telephone cord

Models: XDECT R035BT XDECT R035

1 48
Download 48 pages 50.42 Kb
Page 6
Image 6

Connect the telephone cord

Connect the TEL line jack to a standard telephone wall jack.

Test the connection

1.Pick up the handset from the cradle and press Talk/flash. You should hear a dial tone, and the display should say Talk.

xx If you don't hear a dial tone or the display says Check Tel Line, try checking the connection between the base and the phone jack.

2. Make a quick test call. (Press End to hang up.)

xx If there's a lot of noise or static on the call, see page 33 for tips on avoiding interference.

3.Test any accessory handsets the same way. If you can’t get a dial tone or the handset display says Unavailable, try resetting the handset (see page 36).

Setting Up the MobileLink Bluetooth™

Connection

The new XDECT R035BT with MobileLink technology can connect with Bluetooth phones supporting Bluetooth V2.0 handsfree profile. The following phones have been tested with this feature (see our website for the most up to date list of tested phones):

xx xx xx

Apple

Motorola

RIM

xx xx xx

HTC

Nokia

Samsung

xx xx xx

LG

Palm

Sony Ericsson

2

Page 6
Image 6
Uniden XDECT R035 manual Setting Up the MobileLink Bluetooth Connection, Connect the telephone cord, Test the connection