![](/images/new-backgrounds/1177866/17786647x1.webp)
Preparation for installation
You must check the model names of the indoor and outdoor units.
Indoor outdoor unit type and combination
Capacity(Btu/h) | Type | Model name | |
|
|
| |
75k | Indoor unit | AP80S0N | |
|
| ||
Outdoor unit | AP80S0X | ||
| |||
|
|
| |
96k | Indoor unit | AP0AS0N | |
|
| ||
Outdoor unit | AP0AS0X | ||
| |||
|
|
|
Moving the outdoor unit
ffSelect the moving route in advance.
ffBe sure that moving route is safe from weight of the outdoor unit.
ffDo not slant the product more than 30° when carrying it. (Do not lay the product down sideways.)
ffThe surface of the heat exchanger is sharp. Be careful not to get injured during moving and installing the product.
When moving with a crane
•Fasten the wire rope as shown in the figure.
•To protect damage or scratches, insert a piece of cloth between the outdoor unit and the wire rope.
Wire rope
Plate protection cloth
Outdoor unit leg
When moving with a fork lift
•Insert the fork into the holes at the bottom of the outdoor unit carefully.
•Be careful that the fork does not damage the outdoor unit.
Holes for fork lift
Fork lift
ENGLISH
23
PAC_아프리카 |