Samsung AP0AS0ANXSG manual How to connect your extended power cables

How to connect your extended power cables

❋❋Items to prepare (compressor and insulation tape should be prepared by an installation technician.)

Tools	Crimping plier	Connection sleeve (mm)	Insulation tape	Contraction tube (mm)
Spec	MH-14	20 x Ø 6.5(HxOD)	Width 19mm	70 x Ø 8.0(LxOD)
Shape

1.As shown in the figure, peel off the shields from the rubber/wire of the power cable.

-- Peel off 20 mm of the wire shields of the tube installed already.

(Unit: mm)

Power cable (provided)

20 20 20

60 120

180

Wire tube power cable

20

2.Insert both sides of core wire of the power cable into the connection sleeve.

ffMethod 1

-- Push the core wire in to the sleeve from both sides.

• After peeling off the tube wire, you must insert a contraction

CAUTION tube.

ffMethod 2

-- Twist the wire cores together and push it in to the sleeve.

3.Using a cramping pliers, compress the two points and flip it over and compress another two points in the same location.

-- The compression dimension should be 8.0.

-- After compressing it, pull both sides of the wire to make sure it is firmly pressed.

ffMethod 1	ffMethod 2
Compress it 4 times	Compress it 4 times

ffMethod 1

Sleeve

ffMethod 2

Sleeve

Comp. dim.

5mm

5mm

54

PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 54 2015-04-23 오후 2:19:01