Whirlpool DU78OOXS manual AIR DRY Option, Using DEW Start, Clean Signal Light

WATER HEATING HOLD SIGNAL LIGHT &AN SIGNAL LIGHT DELAY WdSH SIGNAL LIGHT

CHINA CRYSTAL Cycle

A light wash and gentle dry for china and crystal. Unless AIR DRY is selected, the heating element

cycles on and off during the “dry” part of the cycle. Cycle time is about 35 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.

Use AIR DRY only. Do not use HI-TEMP WASHING

The AIR DRY Option

Air in the dishwasher is automatically heated during the “dry” part of all cycles.

If the AIR DRY Optton is selected, air in the dishwasher is not heated. Usina this option heIDS

HI-TEMP WASHING Option

When this option is selected, water for the main wash and the final rinse is heated tol45”F (63°C).

Using DEW START

1.Push desired Cycle Selector Button.

2.Push desired Option Selector Buttons.

3.Turn Control Knob clockwise to the number of hours [from 1 to 6 hours] you want the dish- washer to delay before the selected cycle starts.

Option.

save energy, but dishes take longer to dry (Over- night) and some water spotting may result. Some items [such as plastics) may need towel drying.

For best results, use a liquid rinse aid such as Jet-DrV

If the water is already hot enough, the cycle continues without delay. The WATER HEATING HOLD Signal Light will be on while the cycle de- lays for water heating.

4.Close and latch the door. The DELAY WASH Signal Light will come on until the selected cycle starts.

NOTES :

l You can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

lRINSE & HOLD, LOW ENERGY WASH and CHINA CRYSTAL Cycles can’t be delayed.

Changing a setting

You can change a setting anytime during any cycle.

1.Press in the door latch to unlatch the door and stop the cycle.

The CLEAN Signal Light

The CLEAN Signal Light will come on when a washing cycle is complete.

2.Turn the Cycle Control Knob clockwise to the cycle you want.

3.Be sure the detergent dispensers are filled properly for the new cycle.

4.Close and latch the door. The dishwasher will

automatically start the new cycle.

To turn light off, turn the Control Knob clock- wise slightly until the light goes off.

9