![Removing the crisper, meat drawer and covers.. .](/images/new-backgrounds/74827/7482717x1.webp)
Removing the crisper, meat drawer and covers.. .
To remove the crisper and meat drawer:
1.Slide crisper and meat drawer straight out to stop.
2.Lift the front.
3.Slide the rest of the way out.
4.Replace in reverse order.
To remove the covers:
l Covers are held in place by two pegs at the back and two notched tabs in front.
1.Press front tabs out of the way.
2.Liff cover front.
3.Lift back off the pegs.
4.Replace in reverse order.
PUSH THE TAB TO CLEAR THE MEAT DRAWER COVER.
Changing the light bulbs...
PULL OUT AT THE BOTTOM.
Removing the base grille...
To remove the grille:
Light bulbs behind top refrigerator and freezer light shields:
1.Pull bottom of light shield straight out.
2.Lift top of shield off supports,
3.Replace with a
4.Replace panel in reverse order.
Light bulb behind ice maker:
1.Remove the ice bin (see ice maker instructions page 11.
2.Replace bulb with a
3.Replace ice bin.
Dispenser light:
1.Reach the bulb through the dispenser area.
2.Pull down on bulb. Do not twist.
3.Replace with a 12 volt bulb (Part No. GE 904). This bulb is available in the automotive department of most stores.
METAL CLIPS
SUPPORT
1. Open the doors. |
|
|
| To | replace | the | grille: |
| |||||
2. | Pull | grille | outwards | as | shown. |
| 1. | Line | up | grille | support tabs with metal | clips. | |
3. | Do | not | remove | Tech | sheet fastened | behind | 2. | Push | firmly | to | snap into place. |
| |
| grille. |
|
|
|
| 3. | Close | the | doors. | 9 |