Whirlpool ED26MM manual Tips

Models: ED26MM

1 20
Download 20 pages 32.86 Kb
Page 7
Image 7
TIPS

TIPS

l The drspensers WIII work only with the freezer door closed.

l The ice dispenser WIII work only If the bin IS pushed all the way in

l Use only ice crescents tram the ice maker. Other shapes won’t dispense properly

l When you need more Ice than a glass or two, scoop it from the bin or remove the bin The dispenser motor may stop If the dis- penser bar is held in too long It will be ready to run again in about 3 minutes.

l Ice stored too long can go stale like water. Throw it away.

l Ice can shrink. Cold moving arr slowly evap- orates them. If you use ice often, you may never notrce the change.

Plan to remove and empty the storage bin:

lIf the Ice dispenser has not, or will not be used for a

week or more;

l If a power failure causes ice in the bin to melt and freeze together;

lIf the Ice dispenser ISnot used regularly

2.Lift the srgnal arm so it clrcks into the Of‘F position Ice can still be drspensed. but no more will be made

3Lift the front of the storage bin Pull It out.

4Empty the bin Use hot or warm water to melt the ice if necessary. Never use anything sharp to break up Ice in the bin. This can damage the brn and dispenser mechanism.

5.Wash with mild detergent. Rinse well Do not use harsh or abrastve cleansers or solvents.

6.When replacing the bin, make sure it ISpushed In all the way. Push the signal arm down to the ON position to restart Ice production

 

The night light uses a heavy-duty

IO-watt bulb It

1 Pull the covering panel out from the bottom and

should

last about

10,000 hours When it burns out,

slide it to the rear.

purchase

another

from your dealer

 

7

Page 7
Image 7
Whirlpool ED26MM manual Tips