Removing the Roll-Out Shelf.. .
Lift Out the Tray
Tilt the Front;
Lift the Back
The tray rests on a frame that slides out fcr easy loading or unloading It should be the bottom shelf in your arrangement
The tray lifts out of the frame The frame Itself is removed and replaced just like the shelves.
Removing freezer shelves.. .
l | Lift | front | slightly. |
| ? |
|
l | Lift | back | off supports. | c | 7 | |
l | Replace | in reverse | order. | D | ||
|
|
| Lift the Front |
|
| |
|
|
| Then the | Back |
|
|
Removing the crisper, meat pan and covers.. .
l Slide crisper and meat pan straight out to stop.
lLift the front.
lSlide the rest of the way out l Replace in reverse order.
Push the Tab
to Clear the Cover.
l Covers are held in place by two pegs at the back and two notched tabs In front.
-Press front tabs out of the way.
-Lift back off the pegs.
-Replace in reverse order
Changing light bulbs...
Before removing a light shield for cleaning or for
replacing a bulb, unplug the refrigerator. Use op- phonce bulbs only
Pull Out at the
Removing the freezer basket.. .
For proper air movement, keep the freezer basket In place when the refrigerator ISoperating.
To remove the basket:
lSlide out to the stop.
I-
O Lift the front to clear _ the stop
l Slide out the rest of the way
To replace the basket:
l Place basket on the slrdes l Make sure the wire stops
clear | the | front of theslides |
l Slide | basket | In |
8 |
|
|
Light bulbs behind retrigerator and freezer control consoles:
-Pull bottom of control panel straight out.
-Replace panel In reverse order.
l light bulb behlnd ice maker:
-Remove the ice brn [see ice maker Instructions page6).
-Replace with a
-Replace Ice bin
l light bulb above crisper:
-Lift shield off base supports.
-Replace with a
-Replace shield in reverse order.
l Dispenser light:
-Reach the bulb through the dispenser area
-Replace with a
