Whirlpool EH070CFXCO manual The lights do not work, The motor seems to run too much

Models: EH070CFXCO

1 16
Download 16 pages 52.41 Kb
Page 7
Image 7
The lights do not work

The lights do not work

The motor seems to run too muchWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.

Is a light bulb loose in the socket or burned out? See the “Changing the Light Bulb” section.

The motor seems to run too much

Temperature is too warmWARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Is there excessive frost or a package preventing the door or lid from closing? Defrost and clean the freezer, or move the package so the lid closes properly.

Is the room temperature hotter than normal? Expect the motor to run longer under warm conditions. At normal room temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more of the time.

Has a large amount of food just been added to the freezer? Adding a large amount of food warms the freezer. It is normal for the motor to run longer in order to cool the freezer back down. Add no more unfrozen food at one time than will freeze in 24 hours — approximately 2 to 3 lbs

(0.9 to 1.4 kg) per cubic foot of freezer space.

Is the lid opened often? Expect the motor to run longer when this occurs. In order to conserve energy, try to get everything you need out of the freezer at once, keep food organized so it is easy to find, and close the lid as soon as the food is removed.

Is the control set correctly for the surrounding conditions? Refer to the “Using the Control” section.

Is the lid not closed completely? Push the lid firmly shut. If it will not shut all the way, see “The lid will not close completely” later in this section.

Is the lid gasket sealed all the way around? Contact a qualified person or a technician.

Is there enough air circulation space around the freezer? See the “Location Requirements” section.

NOTE: If the problem is not due to any of the above, remember that your new freezer will run longer than your old one due to its high-efficiency motor.

Temperature is too warm

Is the lid opened often? Be aware that the freezer will warm when this occurs. In order to keep the freezer cool, try to get everything you need out of the freezer at once, keep food organized so it is easy to find, and close the lid as soon as the food is removed.

Has a large amount of food just been added to the freezer? Adding a large amount of food warms the freezer. It can take several hours for the freezer to return to the normal temperature.

Is the control set correctly for the surrounding conditions? Refer to the “Using the Control” section.

The lid will not close completely

Are food packages blocking the lid? Rearrange containers so that they fit more tightly and take up less space.

The lid will not close completelyWARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Are the gaskets dirty or sticky? Clean gaskets according to the directions in the “Freezer Care” section.

Does the freezer wobble or seem unstable? Level the freezer. Refer to the “Location Requirements” section.

The lid is difficult to open

The lid is difficult to openWARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Are the gaskets dirty or sticky? Clean gaskets according to the directions in the “Freezer Care” section.

The freezer clicks but does not run

Has the local power failed? Unplug the freezer for

30 minutes to allow the refrigeration system to equalize. During this time, keep the lid closed whenever possible.

7

Page 7
Image 7
Whirlpool EH070CFXCO manual The lights do not work, The motor seems to run too much, Temperature is too warm