Using Your Refrigerator
Contlnued
POWER SAVER
. CONSUMES LESS ENERGY. REDUCES EXTERIOR MOISTURE.
Gulde stop
.++I”
I‘II
I II II
Shelf support
Power saver control
The Power Saver Control on the Control Console operates electric heaters around the door open- ings. These heaters help keep moisture from form- ing on the outside of the refrigerator.
1.Use the CONSUMES LESS ENERGY setting when humidity is low.
2.Use the REDUCES EXTERIOR MOISTURE setting if moisture forms on the outside of the refrigerator.
Adjustlng the refrigerator shelves
Shelves can be adjusted to match the way you use your refrigerator.
To remove shelt:
1.Remove items from shelf.
2.Slide shelf straight out to the stop.
3.Lift front and slide shelf the rest of the way out.
To replace shelf:
1.Fit back of shelf on top of guides with wire stops on the bottom of guides.
2.Lift front and slide shelf in until it clears guide stops.
Adjusting the freezer shelf (model ETlZLK)
To remove shelf:
1.Lift front slightly.
2.Lift back off supports.
3.Replace in reverse order.
To adjust shelf:
1.Remove shelf.
2.Remove supports by sliding upwards.
3.Replace supports on desired level.
4.Replace shelf.
Changing the light bulb
Electrical Shock Hazard
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Shock and injury can occur if electricity remains connected.
To change refrigerator Ilght:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to find bulb.
3.Remove bulb.
4.Replace with a
5.Reconnect power supply.
6
