Using your refrigerator
Control
Power Saving IControl
Setting the control.. .
The Temperature Control IS on a console In- side the refrigerator in the top right corner It controls the temperature in both the refrigerator and freezer. Set the control to Number 3.
.l
Glve the refrigerator tlme to cool down com- pletely before addrng food. (Thus may take several hours).
The control will be set about right when milk or juice is as cold as you like.
This setting should be about right for nor- mal household refrigerator usage.
Power Saving Control.. .
The Power Savlng Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.
Use the “OFF” set- ting when humidity is low.
Use the “0N”setting if moisture fcfms
on the outside of the refrigerator.
Adjusting the shelves...
I.First, remove food from shelf.
2. Slide shelf straight out to stop.
3. Lift front.
4. Slide the rest of the way out.
Guide Stop
Shell Stop
Replacing | Shelf: |
|
| |
1, Fit back of shelf on top of guides with wire stops |
|
| ||
on the bottom of guides. | ‘Shelf | Gulde | ||
2. Lift front, | slide shelf in until it clears guide stops. | |||
|
|
Removing crisper and crisper
cover...
Removing Crisper:
l Slide crisper straight out. Remove Cover:
1.Lift back, then slide to the rear until the front con be lifted.
2.Lift cover up and out. Replaclng Cover:
I, Slide the front cover tabs into the bock of the front supports on the refrigerator wall.
2.Lower back into place.
Lift the Back, Then Slide to Rear and Lifl