Whirlpool FES330E, FES364E, FEP320E Removing The Oven Door Cont, To replace, Caring For Your Range

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

To replace:

NOTE: The nails or screws you inserted must still be in both sides of the door.

1. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

2.	Rest the hinge hanger so that it is flat (at the		Remove nail
	bottom of the hinge hanger on the bottom of the		or screw
3.	front frame slot).
	Position the door with the hinge hanger slots
4.	almost parallel to the front frame.	Oven door			Range
	Push up and in until the hinge hanger slots
	become fastened to the range. Lower the door				Hinge
	and rotate it slightly from the front to the back
	until the slots are fully fastened. The hinge	Up			hanger
	hanger will be close to the bottom of the front
5.	frame slot.				Hinge
	Pull door open about halfway and remove the				hanger
	nails or screws.		In		flat
6.	Close the door.
				Front frame slot
				bottom

40