![bMlP COOKTOPANDSURFACEBURNERS](/images/new-backgrounds/73102/7310235x1.webp)
bMlP COOKTOPANDSURFACEBURNERS
1.Remove the surface burner grates.
I | 1 | I |
at both front corners until the support rods lock into place.
NOTE: Do not drop the
3. Wipe the surface under the cooktop with warm,
71~~~Si!~~3pPg
pad on heavily soiled areas.
4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove
Carbon Monoxide Poisoning Hazard Do not operate with a yellow flame.
Doing so can result in death, heart attack, oi convulsions.
5.Check the burner flames once in a while for proper size and shape as shown.
A good flame is blue in
Portscolor. If flames lift away from ports, are yellow, or are noisy, turn off the burner. Allow the burner to cool and follow Step 6.
-If you still have a problem, contact an authorized Roper service technician to check the air/gas
mixture or see the Installation Instructions.
6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.
DO NOT use a tooth- pick to clean the ports. Toothpick pieces may
clog the ports. | ’ |
18