Freezer Safety
Your safety is important to us.
This guide contains safety statements under warning symbols. Please pay special atten- tion to these symbols and follow any instruc- tions given. Here is a brief explanation of the use of the warning symbol.
This symbol alerts you to such dangers as personal injury, burns, fire, and electrical shock.
IMPORTANT SAFETY INSTRUCTIONS
Read all operating instructions before using your freezer.
‘Child entrapment and suffocations are not problems of the past. Junked or abandoned freezers are still dangerous, even if they will “just sit in the garage for a few days.”
If you are getting rid of your old freezer, do it safely. Please read the enclosed safety booklet from the Association of Home Appliance Manufacturers. Help prevent acci- dents.
I | - SAVE THESE |
Help us help | you |
Please: |
|
l Install and level the freezer on a floor that will hold the weight and in an area suitable for its size and use.
l Do not install the freezer near an oven, radiator, or other heat source.
l Use the freezer only in an area where the temperature will not exceed 110°F
(43.3%) or drop below 55°F (13°C).
lKeep the freezer out of the weather.
l Connect the freezer only to the proper kind of outlet, with the correct electrical supply and grounding. (See “Locating the proper electrical supply” on page 6.)
l Do not load the freezer with food before it has time to get properly cold.
lUse the freezer only to do what home freezers are designed to do.
l Properly maintain the freezer.
l Make sure the freezer is not used by anyone unable to operate it properly.
l Never allow children to operate, play with, or crawl inside the freezer.
l Never clean freezer parts with flam- mable fluids. The fumes can create a fire hazard or explosion.
l FOR YOUR SAFETY l
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION.
INSTRUCTIONS -
Also, if your freezer has a Consumer Buy Guide Label, remove it, any packaging materials, tape, and inside labels (except the model and serial number label) before using the freezer.
To remove any remaining glue:
lRub briskly with thumb to make a ball, then remove.
OR
l Soak area with liquid hand dishwashing detergent before removing glue as described above.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners. These can damage the material. See “Important Safety Instructions” above.
NOTE: Do not remove the Tech Sheet located on the back of the freezer.
3
