Changing the light bulb (on some models)
Electrical Shock Hazard
Before removing the light bulb, either turn Temperature Control to OFF and unplug the freezer, or disconnect the electricity leading to the freezer at the main power supply.
Shock and injury can occur if electricity remains connected.
To replace interior light:
1.Disconnect freezer from power supply, and turn Temperature Control to OFF.
NOTE: Turning Temperature Control to OFF does not disconnect power to
the freezer.
2.Remove the light shield by squeezing sides slightly and pulling out.
3.Replace bulb with 15watt appliance bulb
4.Replace light shield. Insert back tabs into slots and squeeze shield slightly to insert front tabs into slots.
5.Reconnect freezer to power supply and refer to “Setting the temperature control” on page 8.
II
Light shield
Using the key eject lock (on some models)
If your freezer is equipped with a lock, it can help reduce the hazard of child entrapment.
To lock or unlock the freezer, you must hold the key in the lock while turning. The lock is spring loaded, so the key cannot be left in the lock.
If the key is lost, contact your Roper dealer for a replacement. Always give the complete model and serial number of your freezer when requesting a replacement key.
11
