Hot Surface Indicator Lights (on Standard Control models)
The Hot Surface Indicator Lights will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.
Hot Surface
If the cooktop is on when a power failure occurs, the Hot Surface Indicator Lights will remain on after the power is restored to the cooktop. They will remain on until the cooktop has cooled completely.
Power Light
Each cooktop has a Power On light. The light will glow when any burner is on.
Dual/Triple-Circuit Element
(on some models)
The
Triple Element (on some models)
A 
B 
C
A. Single size
B. Dual size
C. Triple size
Dual Element
A 
B 
To Use SINGLE:
1.Push in and turn knob from the OFF position to the SINGLE zone anywhere between Low and High.
2.Turn knob to OFF when finished.
To Use DUAL and TRIPLE:
1.Push in and turn knob from the OFF position to the DUAL or TRIPLE zone anywhere between Low and High.
2.Turn knob to OFF when finished.
Bridge Element
(on some models)
The bridge element allows flexibility in the left side cooking area.
Use the bridge area to create an oblong heated area to cook with large cookware.
A
B
C
A. Single size
B. Bridge area
C. Single size
Use the bridge element to create an oblong heated area to cook with oblong pans.
To use SINGLE (C):
1.Push in and turn front left knob from OFF position to the SINGLE zone anywhere between Low and High.
2.Turn knob to OFF when finished.
To use SINGLE and BRIDGE area (C + B):
1.Push in and turn front left knob from OFF position to the BRIDGE zone anywhere between Low and High.
2.Turn knob to OFF when finished.
A. Single size
B. Dual size
B
C
A
A. Triple zone
B. Dual zone
C. Single zone
To use SINGLE (A):
1.Push in and turn rear left knob from OFF position anywhere between Low and High.
2.Turn knob to OFF when finished.
To use both Single elements and Bridge (A + B + C):
1.Turn on Single and Bridge (C + B).
2.Turn on Single (A).
3.Turn knobs to OFF when finished.
9
