Adjusting Controls
The settings indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
If the temperature is too warm or too cold in the lower or upper compartment, first check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments and then recheck the temperatures.
CONDITION/REASON: | ADJUSTMENT: |
|
|
LOWER COMPARTMENT section | Adjust LOWER |
too warm | COMPARTMENT Control |
- Door opened often, large amount | toward coldest. |
of food added or room temperature |
|
very warm |
|
|
|
UPPER COMPARTMENT section | If in Refrigerator Mode, |
too warm | adjust UPPER |
- Door opened often, or large | COMPARTMENT Control |
amount of food added or very cold | toward coldest. |
room temperature (can’t cycle often | If in Freeze mode, adjust |
enough) | LOWER COMPARTMENT |
| Control toward coldest. |
|
|
LOWER COMPARTMENT section | Adjust LOWER |
too cold | COMPARTMENT Control |
- Controls not set correctly for your | toward cold. |
conditions |
|
|
|
UPPER COMPARTMENT section too | If in Refrigerator Mode |
cold | adjust UPPER |
- Controls not set correctly for your | COMPARTMENT Control |
conditions | toward cold. |
| If in Freeze mode, adjust |
| LOWER COMPARTMENT |
| Control toward cold. |
LOWER COMPARTMENT
FEATURES
Shelves
For storage flexibility, the shelves in your convertible refrigerator/ freezer are adjustable. Adjust the shelves to different heights and store similar foods together. This reduces the time the door is open and saves energy.
Half-width Shelf/Frame
To Remove and Replace a Shelf/Frame:
1.Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.
2.Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position.
Full-width Shelf
To Remove and Replace the Shelf:
1.Remove all items from the shelf. Remove the shelf by raising the front and pulling it forward.
2.Replace the shelf by lifting the front while sliding the shelf back until it locks into place.
UPPER COMPARTMENT
FEATURES
Upper Compartment Shelf
To Remove and Replace the Shelf:
1.Remove the shelf by lifting the entire shelf slightly and moving it all the way to the
2.Replace the shelf by inserting the
NOTE: The shelf should lower slightly and lock into place. If the shelf does not appear stable, make sure both ends of the shelf are inserted into the shelf supports.
Baskets
Half-width Wire Basket
To Remove and Replace the Basket:
1.Remove all items from basket. Remove the basket by lifting the front out of the slides, then lifting the basket out.
2.Replace the wire basket by lowering the basket into the slides then pushing the basket backward until it is under the shelf.
Upper Compartment Floor
To Remove and Replace the Upper Compartment Floor:
1.Remove all items from the compartment floor.
2.Remove the floor by raising the front and lifting it out.
3.Replace the floor by inserting the two rear tabs into the holes in the rear of the lower compartment. Lower the floor onto the liner of the lower compartment.
10
