RCA VCR VR708HF manual Pro-Tect Plus Locking Feature, Tracking, Time Counter

VCR Features

Pro-Tect Plus™ Locking Feature

To protect set timer recordings and to disable the VCR for use, the unit can be locked so that the buttons on the front panel or remote control won’t work.

•To Lock: Press and hold either the remote control’s ON•OFF or VCR button until the front panel display flashes.

•To Unlock: Press and hold either the remote control’s ON•OFF or VCR button until the front panel display flashes for several seconds. Unlocking is the only way to turn on and use the VCR.

Tracking

Your VCR has automatic tracking which removes streaks and noise from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a different VCR. Use the TRACKING –/+ buttons on the VCR front panel or remote control to remove streaks and noise. You can also use tracking when pausing a tape to reduce the noise of the stilled picture.

When manually adjusting the picture, automatic tracking is turned off. To turn automatic tracking back on, eject the tape and reinsert it.

Note: Tracking has no effect when recording– only during playback.

Hours Minutes

0:30:00

Seconds

Time Counter

The time counter shows the actual time used when recording or playing back a tape. The time counter helps locate the beginning or end of recorded events. It resets to 0:00:00 whenever a tape is ejected from the VCR.

For example, if you record a 30–minute program at the beginning of a tape, rewind it, and then want to go to the end of the first program to start another recording:

1.Press the INFO button twice to display only the time counter.

2.Press the CLEAR button to reset the time counter to 0:00:00.

3.Press the remote control’s FORWARD button (FWD on the VCR) to advance a tape until the time counter reads 0:30:00.

4.Press the STOP button. This is the approximate end of a 30-minute program (you may want to press the PLAY button to verify). When the tape is cued correctly, you can begin recording.

5.Press the INFO button to remove the time counter from the screen and return to the normal display mode.

46 Chapter 4