Using On-Screen Menus
Cable Box Setup
This setup applies only when all channels are received through a cable box. In this case, the VCR will automatically enter the channel used to view cable box programming. Your VCR will use this channel for all future timer recordings.
CABLE BOX SETUP
Do you use your cable box to receive ALL channels or only SOME channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
CABLE BOX SETUP
Can your cable box be operated with a remote control?
1Yes
2No
CABLE BOX SETUP
Please turn on your Cable Box and tune it to channel 2.
Press MENU to continue
CABLE BOX SETUP
Did the cable box tune to channel 9?
1 Yes, setup is complete
2 No, try again
3 No, cancel setup
1.Press MENU to display the VCR MAIN MENU.
2.Press 4 to display the CHANNELS menu.
3.Press 5 to display the CABLE BOX SETUP menu.
4.Select one of the three choices. If ALL Channels is selected, enter the output channel of the cable box (usually 03 or 04), or if A/V jacks connect the VCR to the TV, press the INPUT button on the VCR’s remote control.
5.Select whether your cable box is remote controllable.
6.If your cable box is
7.Enter the code for your cable box from the Cable Box Codes list (see the next page), then press the MENU button to continue.
8.Select one of the choices and follow the
Once you have completed the setup, the VCR confirms the outcome– either complete or canceled.
18 | Chapter 2 |
