Other Information
AUDIO | ANT. IN |
| R |
| L |
OUT | RF OUT |
IN | |
| CH. |
VIDEO | 3 4 |
Back Panel
ANT. IN jack Receives a signal from an antenna or cable system when the VCR is attached with RF cables.
AUDIO (LEFT and RIGHT) and VIDEO IN jacks Receives signals from another component, such as another VCR or camcorder, when connected to these jacks. Use the INPUT button on the VCR or remote control to select the rear video line input A/V jacks (L1) to record from these jacks.
AUDIO (Right and Left) and VIDEO OUT jacks Sends signals from the VCR to another component, like a TV or another VCR, when the other component is connected to these jacks.
CH. 3/4 switch Determines the channel to which the TV must be tuned in order to see the VCR’s picture. Not used when connecting the VCR to the TV using A/V cables.
RF OUT jack Passes the VCR’s signal to a TV using the supplied RF cable.
56 | Chapter 5 |
