Other Information
Advanced Connection
TV + VCR + Satellite Receiver
•Using A/V and RF Coaxial Cables
Note: Your satellite receiver and television back panels may not look exactly like the models shown here.
This connection can also be used for a cable box.
1.Connect the VCR to the TV
A.Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the VCR and the other end to the TV’s antenna input jack.
B.Connect the A/V cables. Connect audio cables to the VCR’s R and L Audio OUT jacks and the other ends to the TV’s corresponding audio input jacks (if your TV only has one audio input jack, use the VCR’s L audio jack to connect). Connect one end of the video cable to the VCR’s VIDEO OUT jack, and the other end to the TV’s video input jack.
2.Connect the satellite receiver to the VCR
A.Connect one end of a second RF coaxial cable (not included) to the VCR’s ANT. IN jack. Connect the other end to the satellite receiver’s antenna output jack.
B.Connect the A/V cables. Connect audio cables to the VCR’s R and L audio IN jacks and the other ends to the satellite receiver’s audio output jacks. Connect one end of the video cable to the VCR’s VIDEO IN jack, and the other end to the satellite receiver’s video output jack.
TV
VCR
Satellite
TV
VIDEO |
| AUDIO |
|
R | L / MONO |
| |
|
| ||
|
| IN |
|
|
| L |
|
|
| OUT | CABLE/ |
|
|
| |
|
|
| ANTENNA |
|
|
|
1B | 1A |
VCR |
|
AUDIO | ANT. IN |
| |
R |
|
L | RF OUT |
OUT IN CH | |
3 | 4 |
VIDEO |
|
SATELLITE |
|
| 2B | 2A |
RECEIVER |
|
|
| |
|
|
|
| |
|
|
| IN FROM ANT | CH3 |
|
|
|
| |
| OUT |
|
| CH4 |
|
|
| OUT TO TV | SATELLITE |
VIDEO | L | R | IN | |
|
|
|
|
3 4
From Cable
or TV AntennaFrom Satellite
3.Connect a TV antenna or cable feed to the satellite receiver
If you have cable or a standard TV antenna, connect its RF coaxial cable (not included) to the antenna input jack on the satellite receiver.
4.Connect the satellite antenna’s cable to the satellite receiver
Connect the satellite antenna’s RF coaxial cable feed (not included) to the receiver’s satellite input jack.
Note: To hear stereo output from the satellite receiver, you must use the video line input “channel.” RF coaxial cable only carries mono sound.
60 | Chapter 5 |
