Ice and Water

The ice maker is not producing ice or not enough ice

 

The water dispenser will not operate properly

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely.”

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? Straighten the water source line.

■New installation? Flush and fill the water system. See “Water Dispenser.”

■Is the water pressure at least 30 psi (207kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Water filter installed on the refrigerator? Remove filter and operate dispenser. If water flow increases, the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Recently removed or reversed the doors? Make sure the water dispenser wire/tube assembly has been properly reconnected at the bottom of the refrigerator door. See “Refrigerator Doors.”

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Water is leaking from the dispenser system

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Water Dispenser.”

■Recently changed water filter? Flush the water system. See “Water Dispenser.”

■Water on the floor near the base grille? Make sure the water dispenser tube connections, at the bottom of the refrigerator door, are fully tightened. See “Refrigerator Doors.”

Water from the dispenser is warm

NOTE: Water from the dispenser is only chilled to 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

13

Page 12 Page 14
Page 13
Image 13
Whirlpool GR2SHWXPQ02, GR2SHWXPS02 Ice and Water, Ice cubes are hollow or small, Off-taste, odor or gray color in the ice
Page 12 Page 14

W10131410A, GR2SHWXPL02, GR2SHWXPQ02, GR2SHWXPS02 specifications

The Whirlpool GR2SHWXPS02, GR2SHWXPQ02, GR2SHWXPL02, and W10131410A represent a range of innovative appliances designed to elevate the user experience in modern kitchens. These models blend cutting-edge technology with user-friendly features, making them an ideal choice for anyone seeking efficiency and convenience.

One of the standout features of these Whirlpool models is their spacious interiors, providing ample storage for groceries and meal prep items. Each variant is designed with adjustable shelves, allowing for flexible organization according to personal needs. This adaptability caters to various sizes of food items, such as tall bottles and large containers, ensuring users can maximize their storage potential.

In terms of technology, these refrigerators are equipped with advanced cooling systems that maintain optimal temperatures and humidity levels. This helps in preserving the freshness of food items for longer periods. The incorporation of LED lighting not only adds a modern aesthetic but also enhances visibility, ensuring users can easily locate items even in darker corners.

Energy efficiency is another critical aspect of these models. They are designed to consume less energy while still delivering top-notch performance. This eco-friendly feature not only reduces the carbon footprint but also leads to savings on utility bills, making it a smart investment for budget-conscious consumers.

The intuitive control panels offer simplicity and convenience, allowing users to adjust settings easily. Some models may even incorporate smart technology, enabling users to monitor and control their refrigerator remotely via smartphone applications. This feature provides added peace of mind and makes it easier to manage food inventory, even while away from home.

When it comes to design, the Whirlpool GR2 series stands out with its sleek and modern appearance, available in various finishes that complement any kitchen décor. The stainless steel options not only add sophistication but are also resistant to fingerprints, ensuring that the appliance continues to look sleek with minimal maintenance.

In summary, the Whirlpool GR2SHWXPS02, GR2SHWXPQ02, GR2SHWXPL02, and W10131410A offer a blend of spacious storage, advanced cooling technologies, energy efficiency, and modern design. These features make them an excellent choice for individuals and families navigating the demands of contemporary living, setting a high standard for kitchen appliances. With this range, Whirlpool continues to demonstrate its commitment to innovation and consumer satisfaction, delivering appliances that enhance daily life.
Top Page Image Contents