3.Attach the drain hose to the air gap with the large
NOTE: If the drain hose was cut, use 1¹⁄₂" to 2" (3.8 to 5 cm)
4.Use a rubber hose connector (not provided) with spring- or
A
| B |
|
|
| C |
|
| D |
|
| E |
H |
|
|
| G | F |
A. Drain | E. Drain hose |
|
B. Spring- or | F. Rubber hose connector | |
C. Air gap | G. Waste tee |
|
D. Large | H. Drain trap |
|
5.Insert the drain hose through the hole cut in the cabinet and to the center front of the opening where the drain connection will be made.
A
A. Drain hose
Connect Drain Hose to Waste
IMPORTANT: Always use a new drain hose even when installing a new replacement dishwasher.
1.Drill a 1¹⁄₂" (3.8 cm) diameter hole in the cabinet wall or floor on the side of the opening closest to the sink.
-
2.Remove the waste disposal knockout plug. NOTE: Do not cut the end of the drain hose.
3.Attach the drain hose to the waste disposal inlet with the large
This connection must be before the drain trap and at least 20" (50.8 cm) above the floor.
NOTE: It is recommended that the drain hose be looped up and securely fastened to the underside of the counter.
A
B
C
D
A. Large | C. Disposal inlet |
B. Drain hose | D. Drain trap |
4.Insert the drain hose through the hole cut in the cabinet and to the center front of the opening where the drain connection will be made.
A
A. Drain hose
Connect Drain
IMPORTANT: Always use a new drain hose even when installing a new replacement dishwasher.
1.Drill a 1¹⁄₂" (3.8 cm) diameter hole in the cabinet wall or floor on the side of the opening closest to the sink.
-
2.Cut the end of the drain hose, if needed. NOTE: Do not cut the ribbed section.
3.Attach the drain hose to the waste tee with the 1¹⁄₂" to 2"
(3.8 cm to 5 cm)
This connection must be before the drain trap and at least 20" (50.8 cm) above the floor.
10
