4.To replace grease filters, slide filter in the frame slot on the front of the opening.
Push filter upward and push to the rear to lock info place.
Charcoal Filter (model MHElORW)
Model MHElORW is installed to recirculate air. The charcoal filter (Part No. 4158313) should be replaced every
1. For your | personal | safefy, | turn | 3. Lift the back of the | charcoal | |
off | the electrical | power | at | filter. Slide the filter | straight | |
the | main | power supply. | To | out. |
| |
replace | charcoal | fllter: |
|
|
| |
remove | the vent | cover |
|
|
| |
mounting | screws. |
|
|
|
|
4.Slide a new charcoal filter Into place. The filter should rest at the angle shown.
2.Tip the cover forward, then lift out to remove.
5.Slide the bottom of the Vent cover into place. Push the top until it snaps into place. Replace the mounting screws.
6.Turn the power back on at the main power supply.
7.Do not operate the hood without the filters in place.
20