The Cooktop light:
Electrical Shock Hazard
Turn ott power ai maln power supply betore re- placlng the light bulb. Failure to do so could re- sutt In electrlcal shock.
The Oven light:
Electrical Shock Hazard
Turn otl Dower at maln Ipower siupply before re- placlng the light bulb. Failure to do so could re- sult In electrical shock.
2.Remove the five screws holding the bottom panel in place.
3.Lower the front of the panel. Slide the panel forward to remove.
2.Remove the vent cover mounting screws,
3.Tip the cover forward, then lift out to remove.
tli
4.Remove shipping tape from bulbs - if still in place - before removlng bulbs.
5.We recommend replaclng bulb(s) with candelabra base
6.Replace the bottom panel in reverse order.
4.Remove bulb holder mounting screw.
5.Slide bulb holder out, then turn towards front to remove bulb from oven.
6. We recommend replacing
bulb(s) with candelabra base
7.Replace the bulb holder and mounting screw
8. Slide the top of the vent cover into place. Push the bottom until it snaps into place. Replace the mount- ing screws. Turn the power back on at main power
supply.
21