Whirlpool MIcrowave Ovens manual Defrosting, Changing cook powers

Touch a Number Pad for the Cook Power you want.

Touch START.

The display will show what you touched

This example shows 50% of full power.

The COOK CYCLE 1 and COOK POWER Slg- nal Lights WII stay on to show that the oven is cooklng in the first cycle at a Cook

Power other than high

count The Display counts down the time to show

down how much cooking time IS left In the flrsl cycle

For 2 of every 10 seconds, the Display WIII show the Cook Power you selected

When the cooklng time ends. you will hear 4 beeps (You can stop the beeping by opening the door or by touching CANCEL ) When the beeping stops, the Display WIII show the time of day

Changing cook powers

l Cook Power can be changed at any time during the cooking cycle -Touch COOK POWER

-Touch a number for the new Cook Power

-Touch START The cycle will cook at the new Cook Power for the original time OR...

-Touch COOK POWER twice If you want to change a lower Cook Power to high -Touch START

Defrosting -

Use QUICK DEFROST to thaw frozen food before cooktng For suggested defrost times, see the guide on the Inside of the oven door or the chart in your MICRO MENUS* Cookbook

lTmk

DO THIS... THIS HAPPENS...

1. Put frozen food in the oven and close the door.

The QUICK DEFROST Signal Light will come on and the Display will show four O’s

2. Touch QUICK DEFROST.

3. Touch Number Pads for the defrosting time you want.

The Display will show the numbers you touched in the order you touched them. This example shows 2 minutes, 30 seconds

(continued on page 10) 9