Using “PAUSE"
For best results, some recipes call for stirring, turning, or adding ingredients during
cooking. Your microwave oven can be set to pause between COOK CYCLE 1 and 2 to
give you time to stir or turn the food, or to add ingredients
DO THIS... THIS HAPPENS . . .
Put food In the oven and
close the door.
Touch in desired cook-
ing instructions for
COOK CYCLE 1 (page 11).
Touch PAUSE.
Touch In desired cook-
ing lnstructlons tor
COOK CYCLE 2 (page
11).
Touch START.
q The PAUSE Signal Lrght will come on and
4 the Display will show the Cook Power you
selected for COOK CYCLE 1 (if other than
high), or the time selected for the COOK
mm CYCLE1
When COOK CYCLE 1 IS over, you will hear
one beep. The oven will shut off
The PAUSE and COOK CYCLE 2 Signal Lights
will come on The Display will show the
time set for COOK CYCLE 2
ml Open the door Stir, turn or add ingredients
Close the door
Touch START to continue wrth COOK CYCLE 2
The oven will remaln off until you touch
START.
Adding “PAUSE”
The PAUSE can be added while the oven IS operating In COOK CYCLE 1, and tf there is
to be a COOK CYCLE 2
1 Touch PAUSE
2 Touch START
The mrcrowave oven WIII stop automatrcally after COOK CYCLE 1 You will hear one
beep COOK CYCLE 2 WIII not begin until START
IS
touched
If COOK CYCLE 2 has already started, PAUSE cannot be added Open the oven door
to stop cookrng, stir or turn food, close the door and touch START