GETTING TO KNOW YOUR MICROWAVE OVEN
10.COOK TIME. Touch this pad followed by Number pads to enter cooking times. See pages 20, 22, and 23 for more information.
11.COOK POWER. Touch this pad, after the cook time has been set, followed by a Number pad to set the amount of microwave energy released to cook the food. The higher the number, the higher the power or faster the “cooking speed.” See page 21 for more information.
12.CLOCK SET. Touch this pad followed by Number pads to enter the correct time of day. See page 17 for more information.
13.Number Pads. Touch Number pads to enter cooking times, cook powers, and quantities.
14.START/ENTER. Touch this pad to start a function that you have set.
15.ADD MINUTE. Touch this pad to cook for one minute at 100% cook power or to add an extra minute to your cooking cycle. See page 18 for more information.
16.OFF/CANCEL. Touch this pad to erase an incorrect command or to cancel a program during cooking. This pad will not erase time of day.
•If you have entered all settings for a function but do not touch the Start/Enter pad in 5 seconds, the Start? indicator light will flash.
•If you open the door while the oven is on and then shut the door, the Start? indicator light will flash.
Audible signals
Audible signals are available to guide you when setting and using your oven:
•A programming tone will sound each time you touch a pad.
•Four tones signal the end of a cooking cycle and two tones will sound every minute until you open the door or press the command pad.
•Three tones will sound if you enter incorrect instructions.
Interrupting cooking
You can stop the oven during a cycle by opening the door. The oven stops heating and the fan stops, but the light stays on. To restart cooking, close the door and
TOUCH
START
NOTES:
•If you choose an auto cook function and change your mind, you must press OFF/ CANCEL before you choose another auto cook function.
•If you attempt to enter unacceptable instructions, three tones will sound, and “Err” will appear on the display. Touch OFF/CANCEL and
•Once you choose a function, an indica- tor light (▲) will flash as a prompt for the next action you need to perform.
•If you choose a function but do not press another command pad within one minute, the display returns to the time of day and you have to start over.
ENTER
If you do not want to continue cooking:
•Close the door and the light goes off.
OR
•TOUCH
OFF
CANCEL
NOTE: Before setting a function, touch OFF/CANCEL to make sure no other function is on.
16
