INSTALLATION INSTRUCTIONS

Electrical requirements

Observe all governing codes and ordinances.

A 120 Volt, 60 Hz, AC only, 15 amp fused

electrical supply is required. (A time-delay

fuse is recommended.) It is recommended that a separate circuit serving only this appliance be provided.

wWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In

the event of an electrical short circuit,

grounding reduces the risk of electric shock

by providing an escape wire for the electric

current. The microwave oven is equipped

with a cord having a grounding wire with a

grounding plug. The plug must be plugged

into an outlet that is properly installed

and grounded.

WARNING: Improper use of the

grounding can result in a risk of electric shock.

Consult a qualified electrician or service-

man if the grounding instructions are not

completely understood, or if doubt exists as

to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

For a permanently connected appliance: This appliance must be connected to

a grounded, metallic, permanent wiring system, or an equipment grounding con- ductor should be run with the circuit conductors and connected to the equip- ment grounding terminal or lead on the appliance.

7

Page 7
Image 7
Whirlpool YMT8068SE, YMT8066SE installation instructions Grounding Instructions, Electrical requirements