7. |
|
|
|
|
|
GHOUNDING | INSTRUCTIONS |
| |||
Electrical | ground is required | on this appliance. | DO NOT, | UNDER ANY | |
CIRCUMSTANCES, | REMOVE THE POWER SUPPLY CORD GROUND PRONG. | ||||
8. Recommended | grounding | method | 9. Alternate | grounding | method |
For your personal safety, this appliance must be
grounded. This appliance is equipped with a power supply cord having a
ized and grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not avail- able, it is the personal responsibility and
obligation of the customer to have a properly polarized and grounded
If changing and properly grounding the wall receptacle is impossible and where local codes permit [consult your electrical inspector], a temporary adapter may be plugged into the existing
If this is done, you must connect the grounding eyelet on the adapter to the wall receptacle cov- erplate screw and from this same screw, you must connect a separate copper ground wire (No.16 minimum) to a grounded cold water pipe?
Do not ground t,o a gas supply pipe. Do not
connect to electrical supply until appliance is
permanently grounded.
*Cold water pipe must have metal continuity to electrical ground and not be interrupted by plas- tic, rubber or other electrically insulating connec- tors (including water meter or pump] without adding a jumper wire at these connections.
9
cup (250 ml] of cold water in a glass container in the oven. Close the door. Make sure it latches. Follow the directions on page 10 to set the oven to COOK for 2 minutes. When the time is up, the water should be heated.
11.This microwave oven is designed for use in the household only and must not be
used for commercial purposes.
DO NOT remove the service panel, door, or control panel at any time. The unit is equipped with high voltage and should not be serviced unless by an authorized Whirlpool trained service technician.
7
