Whirlpool MW3500XM Defrosting and cooking in two cycles, Changing cook powers, Standing time

6. Touch START.

count down

The COOK1 Signal Light will stay on to show that the oven is cooking. The Cook Power Signal Light will go off. The oven will cook in the Cook Power you selected.

The Display counts down the time to show how much cooking time is left

The Cook Power can be checked by touching the COOK POWER Pad. The COOK POWER Signal Light will come on and the Display will show the Cook Power you selected. Touch STARTto return the Display to the countdown.

When the cooking time ends, you will hear 3 beeps. When the beep- ing stops, the Display will show the time of day.

Changing cook powers

l Cook Power can be changed at any time during the cooking cycle. -Touch COOK POWER.

-Touch a number for the new Cook Power.

-Touch START The oven will continue to cook at the new Cook Power OR...

-Touch COOK POWER.

-Touch CHANGE/CANCEL Pad once, then touch STARTif you want to change a lower Cook Power to HIGH.

Faster or slower defrosting

When you DEFROST at Cook Power 5, the microwave oven automatically uses 50% of full power. For slower or faster defrosting:

l Use 30% of full power for slower defrosting.

l Use 60% of full power for faster defrosting. Defrosting at Cook Powers higher than 50% can cause more cooking on the outside of the food.

Standing time

For best results, allow the food to stand for a while after defrosting. This helps equalize the temperature of the food to provide more even cooking.

Defrosting and cooking in two cycles

For best results, some recipes call for one Cook Power for a certain length of time, and another Cook Power for different length of time. Your microwave oven can be set to change from one to another automatically.

The controls	on your microwave oven can also be set to defrost in Cookl, then
automatically		cook in Cook 2.
DO THIS		...THIS HAPPENS...

1.Put food in the oven and close the door.

12