Compatibility with Factory Steering Wheel Radio Controls

If your vehicle has steering wheel controls for the radio, an optional steering wheel control interface may be available to connect to your Alpine radio. For details, contact your Alpine dealer.

Turning Power On or Off

Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.

1 Press SOURCE/POWER to turn on the unit.

The opening screen appears automatically.

•The unit can be turned on by pressing any button on the unit

except the FLAT/SLIDE, OPEN/CLOSE , TILT and c (Eject).

2 Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

•The IVA-D901 draws minimal current even when its power switch is turned off. If the switched power (ignition) lead of the IVA-D901 is connected directly to the positive (+) post of the vehicle's battery, the battery may be discharged. If this lead is unswitched, it must be disconnected from the battery post should the vehicle be left unused for an extended period of time.

An SPST (Single-Pole, Single-Throw) switch (sold separately) can be added to simplify this procedure. Then, you can simply place it in the OFF position when you leave the vehicle. Turn the SPST switch back ON before using the IVA-D901. For connecting the SPST switch, refer to the "Connection Diagram of SPST switch" (page 70).

•Some operation of the unit cannot be performed while the vehicle is in motion. In this case, be sure to first stop your vehicle and apply the parking brake, then perform the operation.

Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press (Release) at the lower right side until the front panel pops out.

3 Grasp the right side of the front panel, lift it up slightly then pull it out.

•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the left side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the right side of the front panel until it locks firmly into the main unit.

1 2

•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

•Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Initial System Start-Up

Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the left of the connector, there is a small hole.

Using a pencil or other pointed object, press the reset switch mounted behind this hole to complete the initialization procedure.

RESET switch

•Any of the buttons does not function while the monitor is closing by reset.

Raising/Lowering the Monitor

Press OPEN/CLOSE.

The unit beeps 3 times and raises (or lowers) the monitor automatically.

•The IVA-D901 is a precision device. With gentle handling, its unique capabilities can be enjoyed for a long time.

•If the monitor touches an obstacle while it is being raised (or lowered), the unit will stop raising (or lowering) the monitor immediately. Should this occur, remove the obstacle and press OPEN/CLOSE again to lower the monitor.

•When the movable monitor is opened, do not place any object on the monitor and be careful not to bump or apply any pressure to the monitor while it is open. This can cause damage to the mechanism.

•In low ambient temperature conditions, the display may be dark for a short period of time immediately after the power is turned on. Once the LCD has warmed up, the display returns to normal.

•For your safety, some operation of the unit cannot be performed while the vehicle is in motion. In this case, first stop the vehicle and engage the parking brake, then perform the operation.

•Operation of the remote control (pages 52-55) can be carried out even while the monitor screen is closed.

9-EN

Page 10 Page 12
Page 11
Image 11
Alpine IVA-D901 owner manual Turning Power On or Off, Detaching and Attaching the Front Panel, Initial System Start-Up
Page 10 Page 12

IVA-D901 specifications

The Alpine IVA-D901 is a highly regarded in-dash multimedia receiver designed to elevate the in-car entertainment experience. With its sleek design and advanced technology features, it caters to the needs of modern drivers and passengers alike. The unit supports a wide range of media formats, allowing users to enjoy their favorite music and videos on the go.

One of the standout features of the IVA-D901 is its 7-inch motorized touchscreen display. This high-resolution LCD screen offers impressive clarity and color, making it easy to navigate through menus and control media playback. The touchscreen is highly responsive, providing an intuitive interface that enhances user experience. Additionally, the motorized function allows the screen to elegantly retract when not in use, contributing to its aesthetic appeal.

The IVA-D901 stands out with its extensive connectivity options. It supports both Bluetooth and USB connections, facilitating hands-free phone calls and wireless audio streaming. This makes it incredibly convenient for users who wish to maintain focus on the road while still enjoying their favorite tracks. Moreover, the unit is compatible with various external devices, enabling seamless integration with smartphones and tablets.

Another notable characteristic of the IVA-D901 is its versatility in media playback. It is designed to play DVDs, CDs, and a variety of video files, including MP4 and DIVX. The built-in DVD player enhances the multimedia experience, allowing passengers to enjoy movies during road trips. Additionally, the receiver also supports AM/FM radio, providing traditional entertainment options.

Users also benefit from the advanced tuning capabilities of the IVA-D901. Its built-in DSP (Digital Signal Processing) allows for customizable sound settings, ensuring that audio can be tailored to individual preferences. This feature creates a more immersive listening experience, as adjustments can be made based on the acoustics of the vehicle.

In terms of expansion, the Alpine IVA-D901 is equipped with multiple preamp outputs, allowing for the easy addition of amplifiers or subwoofers. This flexibility enables users to enhance their sound system to achieve the desired audio performance.

To sum up, the Alpine IVA-D901 is a powerful multimedia receiver that combines stunning visuals, extensive connectivity, and high-quality audio capabilities. It’s a perfect choice for those who seek luxury and functionality in their in-car entertainment setup.
Top Page Image Contents