Alpine IVA-D901 owner manual DVD Setup Operation, 28-EN

Setup

DVD Setup

4	5
3
		6
2
			7
1

SOURCE/POWER

Rotary encoder

DVD Setup Operation

To display the DVD mode screen:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.When the parking brake is engaged for the second time, release the foot brake.

•For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”

Before setup operation below, select the DVD PLAYER mode.

If a disc is inserted into this unit, make sure to take it out.

The following steps 1 to 6 are common operations to each “Setting item” of DVD Setup. Refer to each section for details.

1 Press SOURCE/POWER.

The main menu is displayed.

2 Press 6 (SETUP).

The Setup mode screen appears.

3 Turn the Rotary encoder to select “DVD,” then

press the Rotary encoder.

The DVD list is displayed.

4 Turn the Rotary encoder to select your desired setting item.

The screen shows the ∗Function Guide.

*Displays the function assigned for each button (the Function buttons).

Setting items:

MENU LANGUAGE ↔ AUDIO LANGUAGE ↔

SUB T. LANGUAGE ↔ COUNTRY CODE ↔ PARENTAL ↔ DIGITAL OUT MODE ↔ OPT. OUT ↔ TV SCREEN

5 Press the Function buttons to switch the setting.

6 Press 7 (RETURN).

The screen returns to the previous one.

•With the DVD screen displayed, pressing and rotating the rotary encoder will adjust the volume level.

•Immediately after inputting titles or changing the settings of DVD mode (while the system is inputting the titles or data automatically) do not turn the ignition key (engine key) to OFF.

Otherwise, a title may not be written, or the settings may not be changed.

Changing the language setting

The audio language, subtitle language and menu language can be set according to your preferences.

Once set, this becomes the default language. This function is convenient when you always want to listen in English. (The language setting is not effective on some discs. If not, the default language is set from the factory.)

•When the settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings are not cleared even when the vehicle’s battery is disconnected.

•To temporarily change the language of the current disc, either do so from the DVD menu or by using the operation described in the section “Switching

the audio tracks” (page 18).

•If the disc does not include the selected language, the disc’s default language is set.

Setting of the Menu Language

Setting item: MENU LANGUAGE

Setting contents: AUTO / ENGLISH / GERMAN/FRENCH /

JAPAN / CODE

Set the language used for the menus (title menu, etc.).

•When “AUTO” is selected, the primary menu language among the recorded ones is played.

Setting of the Audio Language

Setting item: AUDIO LANGUAGE

Setting contents: AUTO/ ENGLISH / GERMAN / FRENCH /

JAPAN / CODE

Set the audio language produced from the speakers.

•When “AUTO” is selected, the primary audio language among the recorded ones is played.

28-EN