Selecting the Monitor Opening Angle

The monitor opening angle can be set in 2 positions.

Press and hold FLAT/SLIDE for at least 2 seconds while the monitor is being raised.

Each press changes the monitor angle back or forth.

•When the back-and-force adjustment of the monitor is interrupted by something cutting in, the monitor functions only opening or closing.

Adjusting the Monitor Viewing Angle

Adjust the monitor's angle for better visibility.

Press TILT and to adjust the monitor's angle so the screen will be in the best viewing position.

Pressing the buttons produces a beep and changes the screen angle between 40 and 105 degrees.

•By pressing TILT or and holding, the angle changes continuously.

•If the monitor touches an obstacle while the angle is being adjusted

the unit stops the screen immediately.

Should this happen, remove the obstacle and press TILT or

again.

•The screen color will vary when viewed at certain angles. Adjust the screen angle for the best viewing position.

•If the voltage of the vehicle's battery power is low, the screen may blink when the screen angle is changed. This is normal and not a malfunction.

Moving the Monitor to be Flat

When you want to operate some function on the car (air conditioner, etc.) which is hidden by the raised monitor, use this function.

1 Press FLAT/SLIDE.

The monitor moves to the flat position.

2 Press FLAT/SLIDE again.

The monitor returns to the previous angle.

•The monitor returns to the previous angle from being flat after 10 seconds.

•If an excessive force is added to the monitor when the monitor is flat, putting an object on the back of the monitor for example, it may cause a malfunction.

Adjusting the Volume/Balance (Between Left

and Right)/Fader (Between Front and Rear)/

Defeat

1 Press the Rotary encoder repeatedly until the mode you wish to adjust is obtained.

Each press changes the modes as follows:

VOL. → NAV.* → SUB W.* → BAL. → FAD. → DEFEAT → VOL.

*NAV. (page 33) and SUBW. (page 23) cannot be adjusted while they are set to OFF.

Volume: 0 - 35

Balance: L15 - R15

Fader: F15 - R15

Subwoofer: 0 - 15

NAV. MIX: 0 - 15

DEFEAT: ON/OFF

The volume level can be adjusted at any time by just turning the Rotary encoder.

2 Turn the Rotary encoder to set to the desired sound within 5 seconds after selecting the mode.

By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults, but MX will be turned off.

•If the Rotary encoder is not turned or pressed within 5 seconds after selecting the Balance, Fader, Defeat and Subwoofer mode, the unit automatically defaults back to the Volume mode.

Lowering Volume Quickly

Activating this function will instantly lower the volume level by 20 dB.

Press MUTE to activate the MUTE mode.

The audio level decreases by about 20 dB.

Pressing MUTE again brings the audio back to its previous level.

10-EN

Page 11 Page 13
Page 12
Image 12
Alpine IVA-D901 Selecting the Monitor Opening Angle, Adjusting the Monitor Viewing Angle, Moving the Monitor to be Flat
Page 11 Page 13

IVA-D901 specifications

The Alpine IVA-D901 is a highly regarded in-dash multimedia receiver designed to elevate the in-car entertainment experience. With its sleek design and advanced technology features, it caters to the needs of modern drivers and passengers alike. The unit supports a wide range of media formats, allowing users to enjoy their favorite music and videos on the go.

One of the standout features of the IVA-D901 is its 7-inch motorized touchscreen display. This high-resolution LCD screen offers impressive clarity and color, making it easy to navigate through menus and control media playback. The touchscreen is highly responsive, providing an intuitive interface that enhances user experience. Additionally, the motorized function allows the screen to elegantly retract when not in use, contributing to its aesthetic appeal.

The IVA-D901 stands out with its extensive connectivity options. It supports both Bluetooth and USB connections, facilitating hands-free phone calls and wireless audio streaming. This makes it incredibly convenient for users who wish to maintain focus on the road while still enjoying their favorite tracks. Moreover, the unit is compatible with various external devices, enabling seamless integration with smartphones and tablets.

Another notable characteristic of the IVA-D901 is its versatility in media playback. It is designed to play DVDs, CDs, and a variety of video files, including MP4 and DIVX. The built-in DVD player enhances the multimedia experience, allowing passengers to enjoy movies during road trips. Additionally, the receiver also supports AM/FM radio, providing traditional entertainment options.

Users also benefit from the advanced tuning capabilities of the IVA-D901. Its built-in DSP (Digital Signal Processing) allows for customizable sound settings, ensuring that audio can be tailored to individual preferences. This feature creates a more immersive listening experience, as adjustments can be made based on the acoustics of the vehicle.

In terms of expansion, the Alpine IVA-D901 is equipped with multiple preamp outputs, allowing for the easy addition of amplifiers or subwoofers. This flexibility enables users to enhance their sound system to achieve the desired audio performance.

To sum up, the Alpine IVA-D901 is a powerful multimedia receiver that combines stunning visuals, extensive connectivity, and high-quality audio capabilities. It’s a perfect choice for those who seek luxury and functionality in their in-car entertainment setup.
Top Page Image Contents