Navigation System (Optional)
|
|
|
|
|
|
Rotary encoder |
| V.SEL | |||
|
SOURCE/POWER
Controlling the Navigation System (Optional)
If an optional Alpine Navigation System is connected to the IVA- D901, some of its functions can be controlled from the
1 Press SOURCE/POWER.
The main menu screen appears on the display.
2 Turn the Rotary encoder and select "NAV.", then press the Rotary encoder to execute the selection.
The Function Guide display changes to show the same button names as those for the remote control supplied.
•When V. SEL is pressed while the Navigation selection mode is being selected in “Setting Visual Mode” (refer to page 32), the navigation mode will be directly activated.
•If the Navigation mode menu is not displayed on the main menu screen, set NAV. IN to on by following "Setting the navigation mode" (page 33).
•If you use the buttons displayed, you can control the navigation system from
For operation, refer to the Owner's Manual for your navigation system.
•Depending on the navigation system connected to this unit, some functions and displays may vary.
•When the Navigation System is on, the audio and visual navigation cuts in.
Auxiliary Device (Optional)
Rotary encoder
SOURCE/POWER
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX terminals on the rear panel of
WARNING
It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.
Install the
If the